Installing The Central Interface Module - Siemens SIPLUS HCS Operating Instructions Manual
Hide thumbs
Also See for SIPLUS HCS:
- Operating instructions manual (154 pages) ,
- Compact operating instructions (20 pages)
Table of Contents
Advertisement
5.3
Installing the Central Interface Module
Tool
You will need a Torx T10 screwdriver.
Mounting the Central Interface Module (CIM)
The CIM is screwed directly onto the POM. The mounting procedure is described below:
Image 5-3
Steps
1
2
SIPLUS HCS4300
Operating Instructions, 11/2015, A5E35452705A/002
Mounting the CIM
Plug the CIM into the POM by means of the four connecting lugs
②
Tighten the four screws
5.3 Installing the Central Interface Module
.
Installing/mounting
①
.
39
Advertisement
Table of Contents
