Installing The Central Interface Module (Cim) - Siemens SIPLUS HCS Operating Instructions Manual

Installation/mounting

5.4 Installing the central interface module (CIM)

5.4 Installing the central interface module (CIM)
Tool
You will need a Torx T10 screwdriver.
Mounting the Central Interface Module (CIM)
The Central Interface Module (CIM) is screwed directly to the rack. The mounting procedure
is described below:
Image 5-5
1
2
3
40
Mounting the CIM
The fixing screws are screwed into the CIM in the delivery condition. Unscrew these 6 fixing
screws.
Connect the connector of the system interface to the CIM
Place the CIM on the rack
②
and mount it with the 6 screws
Operating Instructions, 11/2015, A5E35066204A/RS-AA/002
①
③
SIPLUS HCS4200