Pm4000 Temperature - Siemens SIPLUS HCS Operating Instructions Manual

Connecting
6.6 Connecting I/O modules
6.6.3

PM4000 Temperature

Connecting the measurement inputs
The analog inputs 0...20 mA are connected by means of the 8-pin plug connector X1 of the
PM4000 Temperature.
The measurement inputs for temperature are connected by means of the 8-pin plug
connector X2 of the PM4000 Temperature.
Image 6-7
X1: Four analog inputs for 0...20 mA
8-pin connector with spring-loaded connection. The mating connectors are included in the
scope of supply.
Pin
60
PM4000 Temperature pin assignment
1 Analog channel 1 -
3 Analog channel 2 -
5 Analog channel 3 -
7 Analog channel 4 -
Assignment
Analog channel 1 +
Analog channel 2 +
Analog channel 3 +
Analog channel 4 +
Operating Instructions, 11/2015, A5E35066204A/RS-AA/002
Pin
2
4
6
8
SIPLUS HCS4200