Siemens SIPLUS HCS Operating Instructions Manual page 119

Disassembling the fan module
Proceed as follows to disassemble the fan module:
Image 12-2 Disassembly of fan module
Steps
1
Remove the fan connector (recommendation: pulling directly at the cable makes it easier to remove the
•
connector)
Pull the fan cable out of the holder. Steps
•
fan cable from the holder without using tools.
2
Release the two fastening screws
3
Lift the fan module at the rear and push it backward
4
Lift the fan module
Mounting a new fan module
Refer to Section Mounting the fan module (Page 38) for instructions for mounting a fan
module.
SIPLUS HCS4200
Operating Instructions, 11/2015, A5E35066204A/RS-AA/002
①
⑤
⑦
and pull the cable out through the opening in the housing
② ③ ④
, , shown in the figure illustrate how you can remove the
⑥
Service and maintenance
12.4 Replacing the fan module
⑧
119