Cyclic Input Data - Siemens SIPLUS HCS Operating Instructions Manual

Communications
10.1 Cyclic data exchange
10.1.2

Cyclic input data

Cyclic data exchange between the heating control system and the S7 takes place via the
process/I/O address area of the CPU. The cyclic data can be addressed in the S7 through
the process image or I/O commands.
Cyclic input data for CIM
Byte
0
1
92
Bit Description
Status bits
0 Heater
0: Heating is switched off
1: Heating is switched on
1 Operating mode
0: Production mode
1: Standby mode
2 Line voltage compensation
0: is switched off
1: is switched on
3 0 (not in use)
4 0 (not in use)
5 0 (not in use)
6 0 (not in use)
7 0 (not in use)
0 (not in use)
Operating Instructions, 11/2015, A5E35066204A/RS-AA/002
SIPLUS HCS4200