Power Output Module (Pom); Led Operating Display For Pom - Siemens SIPLUS HCS Operating Instructions Manual

Process and system messages, error handling

11.2 Power Output Module (POM)

11.2 Power Output Module (POM)
11.2.1

LED operating display for POM

The device has 3 LEDs on the front: The LEDs provide information about the operating
status of the device/system.
Meaning of LEDs
READY
green
Channel error
108
HEATING ON ERROR
yellow red
Description
red
LED x off: Channel x is OK
LED x on: Channel x error
Description
Power OFF, device switched off
Initialization: The LED flashes until the device is detected and
addressed by the CIM.
The device is ready.
Heating "ON"
A general fault has occurred, e.g. communication, system volt-
age, temperature
Operating Instructions, 11/2015, A5E35066204A/RS-AA/002
SIPLUS HCS4200