Configuration; Integrating The Hcs4200 Into The Profinet Configuration; Integrating The Hcs4200 Into The Profibus Configuration - Siemens SIPLUS HCS Operating Instructions Manual

Configuration

8.1

Integrating the HCS4200 into the PROFINET configuration

Procedure with SIMATIC S7
If the hardware catalog of your configuration software does not feature the HCS4200 yet, it
can be integrated by installing an HSP. An HSP is available for TIA V13 and can be
downloaded from the SiemensService & Support website
(http://www.siemens.com/automation/service&support).
Procedure with non-Siemens controllers
For PROFINET configuration you will need the language-specific GSDML file. The GSDML
file must be installed in the configuration software.
You can download the GSDML file "GSDML-V2.3-Siemens-002A-HCS4200-
from the Siemens Service & Support website
(http://www.siemens.com/automation/service&support).
If a non-Siemens PROFINET controller is used, install the GSDML file as described in the
manufacturer's instructions.
8.2

Integrating the HCS4200 into the PROFIBUS configuration

Procedure with SIMATIC S7
If the hardware catalog of your configuration software does not feature the HCS4200 yet, it
can be integrated by installing the GSD file. This is available in German (SIEM81C4.gsg)
and English (SIEM81C4.gse) versions and can be downloaded from the
SiemensService&Support website (http://www.siemens.com/automation/service&support).
Procedure with non-Siemens controllers
You will need the language-specific GSD file for PROFIBUS configuration. You can
download the SIEM81C4.gsx files from the SiemensService&Support website
(http://www.siemens.com/automation/service&support).
If a non-Siemens PROFIBUS controller is used, install the GSD file as described in the
manufacturer's instructions.
SIPLUS HCS4200
Operating Instructions, 11/2015, A5E35066204A/RS-AA/002
8
yyyymmdd
"
65