Steps
3
Place the fan module on the rack
•
Push the fan module forward until the two tabs pass through the corresponding openings
•
Lower the fan module at the rear (keyhole) and tighten the fastening screws on the fan module
•
4
Plug the connector of the fan module into the connector on the rear panel
into the holders
SIPLUS HCS4200
Operating Instructions, 11/2015, A5E35066204A/RS-AA/002
③
and lift it at the rear until the screw heads fit through the two keyholes.
⑦
Installation/mounting
5.3 Mounting the fan module
④
⑤
⑥
and press the connecting cable
39