Table of Contents
Advertisement
AP2030DN
Product Description
Figure 2-2 Ports
Each port can be described as follows:
1.
2.
3.
4.
5.
6.
LED Indicator
Type
Default
status after
power-on
Software
startup
Issue 01 (2015-03-10)
ETH0~3: 10/100M port used to connect to the wired Ethernet.
Phone: Phone interface: connects to a POTS phone or modem device.
GE/PoE: 10/100/1000M port used to connect to the wired Ethernet. The port can connect
to a PoE power supply to provide power for the device.
Phone: Phone interface: connects to a traditional PSTN.
Default: Reset button used to restore factory settings if you hold down the button more
than 3 seconds.
Power input interface: 12 V DC.
The actual indicator color may vary according to temperature.
The device has indicators located inside the panel. The indicators turn on after the device is powered on.
Color
Green
Green
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
Status
Description
Steady on
The AP is just powered on and the software is not
started yet.
Steady on
After the system is reset and starts uploading the
after
software, the indicator blinks green once. Until the
blinking
software is uploaded and started, the indicator
2 Hardware Structure
7
Advertisement
Table of Contents
