Huawei AP2030DN Hardware Installation And Maintenance Manual page 19

AP2030DN
Hardware Installation and Maintenance Guide
Installing the device into a junction box (excluding an 86-type box) requires sheet metal
mounting brackets (delivered with screws), which need to be purchased separately. The
procedure is as follows:
1.
2.
3.
Issue 05 (2016-07-22)
Determine locations of mounting holes on the sheet metal mounting bracket based on the
distance between screw holes on the junction box. (In the following example, the screw
holes on the junction box are 83.5 mm distant from each other.)
60mm
83.5mm
Use screws to fix the mounting bracket to the junction box. Ensure that the UP
arrowhead points upwards. If the screw holes on the junction box do not match the M4
screws, customers need to prepare the fastening screws by themselves.
Connect the network cable to the GE/PoE interface and the telephone line to the phone
interface.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
M4
1 N•m
2 AP Installation
13