Table of Contents
Advertisement
AP2030DN
Hardware Installation and Maintenance Guide
Procedure
l
Issue 05 (2016-07-22)
Install an OT terminal.
a.
Align the hole of the OT terminal (conductor upward) with a connecting hole, as
shown in
Figure
5-42.
Figure 5-42 Aligning the OT terminal with a connecting hole
NOTE
When you install an OT terminal, the crimping sleeve is installed as shown in
where A is correct and B is incorrect.
Figure 5-43 Installing an OT terminal, showing the orientation of crimping sleeve
b.
Place the spring washer and flat washer in turn, mount a matching screw, and fasten
it clockwise, as shown in
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
Figure
5-44.
5 Appendix
Figure
5-43,
51
Advertisement
Table of Contents
