Table of Contents
Advertisement
AP2030DN
Hardware Installation and Maintenance Guide
4.
5.
2.5.2 Installing the Device into Other Junction Boxes
Issue 05 (2016-07-22)
NOTE
It is recommended that the length of the cable in the 86-type box should be smaller than 130 mm.
You are advised to connect cables according to the figure.
Align the screw holes at the right and left of the device with the screw holes on the box
and secure the device on the box with a screwdriver.
Close the panel to complete installation.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
2 AP Installation
12
Advertisement
Table of Contents
