● Setting
- Select an image format.
Select "Format2" of "ImageFormatSelector" register.
- Set Decimation lines
Set a value to "DecimationHorizontal", "DecimationVertical" registers. Setting value is Integer type.
AcquisitionStart is disabled when these registers set the value of the other than above.
● Note
Decimation is disabled when the camera is running in Scalable mode or Binning mode.
Scalable and Binning are disabled when the camera is running in Decimation mode.
Changing "DecimationHorizontal", "DecimationVertical" register value is invalid during image stream data
output.
The defective pixel correction is disabled when DecimationHorizontal or DecimationVertical is set to 4 or 8.
Copyright © 2016 – 2019 Toshiba Teli Corporation, All rights reserved.
Register
DecimationHorizontal
DecimationVertical
39 / 80
Value
1, 2, 4, 8
1, 2, 4, 8
http://www.toshiba-teli.co.jp/en/index.htm
D4256843D
xB