Toshiba BU Series Instruction Manual page 78

- MultiFrame function in Random Trigger Shutter mode (TriggerMode = On, TriggerSequence = 0)
Camera transfers "AcquisitionFrameCount" frame(s). It
AcquisitionMode = MultiFrame
AcquisitionFrameCount = 3
TriggerMode = On
TriggerSequence = 0
Start
Acquisition
Command
The trigger can be input in arbitrary timing.
Trigger
Exposure
Frame 1
*Exposure time is determined by ExposureTime setting in TriggerSequence0.
USB Streaming
- Bulk function (TriggerMode = On, TriggerSequence = 6)
Camera transfers "TriggerAdditionalParameter" frame(s)
AcquisitionMode = Continuous
TriggerMode = On
TriggerSequence = 6
TriggerAdditionalParameter = 3
Start
Acquisition
Command
The trigger can be input in arbitrary timing.
Trigger
Exposure
Frame 1
*Exposure time is determined by ExposureTime setting.
USB Streaming
Copyright © 2016 – 2019 Toshiba Teli Corporation, All rights reserved.
Frame 2
Frame 1 Frame 2
AcquisitionFrameCount
Frame 2 Frame 3
TriggerAdditionalParameter
Frame 1 Frame 2
requires "AcquisitionFrameCount" time(s)
Stop
Frame 3 Frame 4
Frame 3
by a single trigger.
Stop
Stream
stops
Frame 3
77 / 80
http://www.toshiba-teli.co.jp/en/index.htm
of trigger.
Start
Counter is reset.
Frame 1
This exposure is
discarded.
Stream
stops
Frame 1
Start
Counter is reset.
Frame 1
Frame 1
D4256843D
xB