Lutcontrol - Toshiba BU Series Instruction Manual

LUTControl

This function allows you to apply the
● Registers
Register Visibility
LUTEnable Expert
LUTIndex Expert
LUTValue Expert
● Setting
- Set the activation of LUT
Set the following value to "LUTEnable" register. The setting value is Boolean type.
- Set the input/output value of LUT
Set the following value to "LUTIndex", "LUTValue" registers. These setting values are Integer type.
"LUTIndex" register value is input level of LUT, and "LUTValue" register value is output level of LUT.
● Note
The setting value of LUTValue register is erased at camera power turn off because LUTValue is not
applied to UserSet.
Copyright © 2016 – 2019 Toshiba Teli Corporation, All rights reserved.
LUT(input: 10bit, output: 10bit) to the output images.
arbitrary
Output
luminance
example of LUT setting
Access
R/W Sets the activation of LUT function.
R/W Sets the input level of LUT.
R/W Sets the output level of LUT.
setting value
FALSE (*)
TRUE
* initial factory setting
LUTIndex / LUTValue
Minimum (*)
Maximum
* initial factory setting
63 / 80
Binarization
Input
luminance
Description
function
Inactive
Active
setting value
0
1023
http://www.toshiba-teli.co.jp/en/index.htm
to be
D4256843D
xB