Timercontrol - Toshiba BU Series Instruction Manual

TimerControl

This section describes TimerControl category for the BU series.
This camera series is able to generate Timer0Active signal, derived from exposure start, by register setting.
This signal can be used as strobe control signal.
・TimerTriggerSource = Line0Active or FrameTrigger
・TimerTriggerSource = ExposureStart
● Registers
Register Visibility
TimerSelector Expert
TimerDuration Expert
TimerDelay Expert
TimerTriggerSource Expert
Copyright © 2016 – 2019 Toshiba Teli Corporation, All rights reserved.
(Line0)
(Frame Start Trigger)
TimerTriggerSource = Line0Active
TimerTriggerSource = FrameTrigger
TRIG_IN
(Line0)
Trigger
(Frame Start Trigger)
Exposure
EXPOSURE ACTIVE
TIMER0 ACTIVE
TimerTriggerSource = ExposureStart
Timer0Active
Access
R Returns the selected timer name.
R/W Sets the width of Timer0Active signal.
R/W Sets the delay of Timer0Active signal.
R/W Selects the source of Timer0Active pulse to start.
Delay Duration
TriggerDelay
Delay Duration
Description
58 / 80
http://www.toshiba-teli.co.jp/en/index.htm
※ ActiveLow
※ ActiveLow
D4256843D
xB