DigitalIOControl
This section describes DigitalIOControl category for the BU series.
This camera provides GPIO output selected by the register setting. And the polarity of the signal is able to
switch by the register setting. The following chart shows the specifications of the selectable signals.
TIMER0 ACTIVE
FRAME ACTIVE
FRAME TRIGGER
● Registers
Register
Visibility
LineSelector
Beginner
LineSource
Beginner
LineMode
Beginner
LineInverter
Beginner
LineStatus
Beginner
UserOutputValue
Beginner
Copyright © 2016 – 2019 Toshiba Teli Corporation, All rights reserved.
EXT_TRIG
Exposure
VD
Sensor Output
USB Streaming
EXPOSURE
ACTIVE
FRAME
TRANSFER
WAIT
Selectable signals
Access
R/W
Selects the Line of I/O connector.
R/W
Selects the source of the output signal.
R
Returns the direction of each Line signal.
R/W
Selects the polarity of each Line signal.
R
Returns the status of each Line signal.
R/W
Sets the user output value.
Delay Duration
Description
53 / 80
* ActiveLow
D4256843D
http://www.toshiba-teli.co.jp/en/index.htm
xB