Installation Manual – BTS3606A Cabinet Installation
Airbridge BTS3606&3606A CDMA Base Station
(1) M3 screw
(5) GND cable
Figure 5-46 Removing the cover the battery cabin
3)
Remove the three M5 screws on the sliding plate inside the cabin and pull out the
sliding plate, as shown in Figure 5-47.
(1) M5 screw
Figure 5-47 Pulling out the sliding plate
(2) Cover of the battery cabin
(6) Temperature monitoring cable
(2) Sliding plate
Huawei Technologies Proprietary
5-46
Chapter 5 Installing Cables
(3) Battery cabin
(4) –48 V cable
(7) Closing plug