Huawei Airbridge BTS3606 Installation Manual page 125

Installation Manual – BTS3606A Cabinet Installation
Airbridge BTS3606&3606A CDMA Base Station
4) Place two batteries on the front part of the sliding plate and connect the batteries
as show in Figure 5-48.
5) Connect the cable between two batteries.
6) Install the protection caps on the positive and negative terminals of the battery.
(1)
(1) Battery
(3) Positive terminal
Figure 5-48 Placing and connecting two batteries
7) Push the two batteries to the end of the cabin, as shown in Figure 5-49.
Figure 5-49 Pushing the batteries inside the cabin
8) Pull out the sliding plate again.
9) Place another two batteries on the front part of the sliding plate and connect the
two batteries as shown in Figure 5-48.
(3)
(2)
(4)
(2) Negative terminal
(4) Cable connecting the two batteries
Huawei Technologies Proprietary
5-47
Chapter 5 Installing Cables
- +
Connecting two batteries