NEC DS1000 Quick Setup Manual page 22

Section 1: Start-up Programming
To program a feature, press # and the feature's code. For example, to enable incoming Paging, press # and dial V P Y ,
then SPK to hang up. By default, System Speed Dial and Time and Date are only available to the attendant.
Feature
Headset
Hotline
Off Hook Signaling
Paging (Incoming)
Prime Line Assignment
Programmable Function
Key Assignments
Programmable Function
Key Ringing
Ringing Line Preference
Speed Dial, Personal
Speed Dial, System
Time and Date
Intercom Voice Announce
(for incoming Intercom calls)
1-18 Section 1: Start-up Programming
User Programmable Features
Mnemonic
#HS #HS + Y to enable or N to disable + SPK to exit
#HL
#HL + Press flashing Hotline key + Enter extension for new Hotline
partner + Program another Hotline key or SPK to exit.
#OHS #OHS + Select mode ( C =Outside line, D =Hotline, I =ICM) + Select
option (see below) + SPK to exit.
Outside line options: C =Camp On tone, O =Off Hook Ringing, 0 = None
Intercom options: C =Camp On, V =Voice Over, 0 =None
Hotline Options: C =Camp On, 0 =None
#VP #VP + Y to enable or N to disable + SPK to exit.
#PLA #PLA + Press one of your flashing programmable keys or ICM +
SPK to exit.
#KP #KP + Press key you want to program + HOLD + ICM + Press VOL
Up or VOL Down to select key option + HOLD + enter any addi-
tional data (if required) + Press VOL Up or VOL Down to select
another key to program, or SPK to exit.
#RAC Call Coverage Keys: #RAC + Call Coverage Key repeatedly to select
ringing mode + SPK to exit.
Call Coverage Keys flash as follows: Lamp only=On red, Immediate
ring=On green, Delay ring=Fast flash green.
#RAL
Outside Line Keys: #RAL + Line Key repeatedly to select ringing
mode + SPK to exit.
Line keys flash as follows : Lamp only=On red, Immediate ring=On
green, Delay ring=Fast flash green, Night ring=Slow flash green.
#RAP
Group Call Pickup Keys: #RAP + Group Call Pickup Key repeatedly
to select ringing mode + SPK to exit.
Group Call Pickup Keys flash as follows : Lamp only=On red, Imme-
diate ring=On green, Delay ring=Fast flash green.
#RLP #RLP + Y to enable or N to disable + SPK to exit.
#SP #SP + Press bin key (for bins 701-710) or DIAL then bin key (for
bins 711-720) + HOLD + Enter outside line (e.g., 1), line group (e.g.,
90), or ICM for Intercom feature + HOLD + Number to store +
HOLD + Name + HOLD + Press another bin key or SPK to exit.
#SP #SP + Dial System Speed Dial bin number (e.g., 200) + HOLD +
Enter outside line (e.g., 1), line group (e.g., 90), or ICM for Intercom
feature + HOLD + Number to store + HOLD + Name + HOLD +
Press another bin key or SPK to exit.
#TD
#TD + Enter time in 24-hour clock using hours (2 digits), minutes (2
digits) and seconds (2 digits) + HOLD + Enter date using month (2
digits), day (2 digits) and year (4 digits) + HOLD + SPK to exit.
#VA #VA + V for voice announce or R for ring + SPK to exit.
Figure 1-1: User Programmable Features
Operation
DS1000/2000 Quick Setup Guide