NEC DS1000 Quick Setup Manual page 46

Section 2: Customizing Features
Programming
To assign an extension's Programmable Function Keys:
1. Enter the programming mode. You see:
USER: nnn
ENTER PROGRAM?
2. Enter 1701 + HOLD . You see:
1701:KEY PROGRAMMING
STATION #?nnn
3. Enter the number of the keyset extension you want to program (e.g., 300) + HOLD . You see:
1701:STA:nnn
KEY NUMBER?n
4. Enter the number of the key you want to program (1-24) + HOLD. You see:
1701:STA:nnn KEY:n
nnnnnnnnn
5. For the key selected, enter the code for the feature you want to assign plus any additional data (see the
chart below) + Vol Up .
2-24 Section 2: Customizing Features
The previously programmed assignment displays.
To be able to program all 24 keys on a 34-button keyset in software versions prior to 02.02.14,
you must set the correct circuit type. See Setting an Extension's Circuit Type on page 1-6 for more.
You can optionally press ICM + Vol Up to scroll through the available key options.
Feature
Undefined (blank) Key
Switched Loop Key
Fixed Loop Key
Line Key
Park Orbit Key
Hotline Key
Call Coverage Immediate Ring
Call Coverage No Ring (lamp only)
Call Coverage Delay Ring
Group Pickup Immediate Ring
Group Pickup No Ring (lamp only)
Group Pickup Delay Ring
Page Zone
System Speed Dial
Personal Speed Dial
Call Timer Key
Voice Mail Record
Night Mode
1
05
13
16
Key Code
00
01
02 + Trunk group (0-8)
03 + Line number (e.g., 1)
04 + Park Orbit (60-69)
+ Hotline Partner's Extension (e.g., 304)
06 + Covered Extension (e.g., 304)
07 + Covered Extension (e.g., 304)
08 + Covered Extension (e.g., 304)
09 + Pickup Group (1-16)
10 + Pickup Group (1-16)
11 + Pickup Group (1-16)
+ Page Zone (0 for All Call, or zone 1-7)
14 + System Bin (200-299)
15 + Personal Bin (701-720)
+ 1 for Manual Timer or 2 for Auto Timer
17
18 + CLEAR
DS1000/2000 Quick Setup Guide