Programming the System
How to Enter the Programming Mode
To enter the programming mode:
1.
Go to any working display telephone.
2.
Do not lift the handset.
3.
Press
4.
Dial
DS1000 VER nn.nn.nn
PASSWORD:
5.
Dial the system password +
USER: nnn
ENTER PROGRAM?
6.
Enter the number of the program you want to change (e.g., 1801) +
How to Exit the Programming Mode
To exit the programming mode:
1.
When you see:
USER: nnn
ENTER PROGRAM?
DS1000 VER nn.nn.nn
PASSWORD:
Press and release the hookswitch, or press
ming, the system automatically stores your entries in Random Access Memory (RAM).
DS1000/2000 Quick Setup Guide
ICM
.
# * # *
HOLD .
Refer to the following table for the default system passwords.
Password Level
System Administrator 1
System Administrator 2
Installer
See the Software Manual on your System Document CD for more on password levels.
OR
If you don't see one of the above prompts, press CONF until you do. When you exit program-
Section 1: Start-up Programming
Password
0000
9999
372000
SPK
.
Section 1: Start-up Programming
Level
1
2
3
HOLD
.
1
1-3