NEC DS1000 Quick Setup Manual page 47

1
6. Program the next consecutive key on the console.
Press
Press
Press
Feature Quick Steps
To use your line or loop key:
1. Press the trunk key.
To use your Park key:
1. Press Park key to Park or retrieve call.
To use your Hotline key:
1. Press key to call Hotline partner.
To use your Call Coverage key:
1. Press key to call covered extension or pick up ringing call.
To use your Group Call Pickup key:
1. Press key to answer call ringing Pickup Group.
To use your Page Zone key:
1. Press key to Page into assigned zone.
To use your System Speed dial key:
1. Press key to dial stored number.
To use your Personal Speed dial key:
1. Press key to dial stored number.
To use your Call Timer key:
1. Press key to start or stop the Call Timer.
answer an outside call.
To use your Conversation Record key:
1. Press key to record conversation in mailbox (must have Voice Mail installed).
To use your Night key:
1. Press key to put the system in the night mode.
DS1000/2000 Quick Setup Guide
1
Feature
Split
Intercom Directory Dialing
Reverse Voice Over
Message Center
Save
For more on these features, refer to the Software Manual on the System Document CD.
OR
CONF to go back to step 4 and select another key to program.
OR
CONF twice to go back to step 3 and select another extension to program.
OR
CONF three times to exit program 1701.
For more on these features, refer to the Software Manual on the System Document CD.
You can set up the Call Coverage key for immediate ring, delayed ring, or no ring.
You can set up the Group Call Pickup key for immediate ring, delayed ring, or no ring.
System Speed Dial keys provide no BLF.
Personal Speed Dial keys provide no BLF.
If you have an Automatic Call Timer Key, the timer will start automatically after you place or
A voice prompt and a periodic beep will remind you that your calls are being recorded.
Section 2: Customizing Features
23 + Covered Extension (e.g., 304)
24 + Message Center Extension
Section 2: Customizing Features
Key Code
20
21
25
2-25
2