NEC DS1000 Quick Setup Manual page 43

Part II: In Class of Service, Enable the Extension's Ability to Put the System in the Night Mode
1. Enter the programming mode. You see:
USER: nnn
ENTER PROGRAM?
2. Enter
0101:CLASS OF SERVICE
COS NUM?n
3. Enter the Class of Service (1-15) you want to program +
0101:COS:n
OFF PREM FWRD?nn
of Service 2.
4. Press
0101:COS:n
ACTIVATE NITES?nnn
5. To allow the Class of Service to put the system in the night mode, dial
To prevent the Class of Service from putting the system in the night mode, dial
6. Press
Press
Part III: Assign Class of Service to Extensions
1. Enter the programming mode. You see:
USER: nnn
ENTER PROGRAM?
2. Enter
1801:EXTENSION PROG
STATION#?
3. Enter the number of the keyset extension you want to program (e.g., 300) +
1801:STA:nnn
PT TYP?n:nnnnnn nnn
4. Press
1801:STA:nnn
CLASS OF SERVICE?n
5. Enter the Class of Service (1-15) you want to assign to the extension selected +
1801:STA:nnn
CLASS OF SERVICE?n
6. Press
Press
Feature Operation
To activate or deactivate Night Service:
1. Do not lift the handset + Press the Night key.
To answer a call that rings a line or loop key at night:
1. Lift handset + Press flashing line or loop key.
DS1000/2000 Quick Setup Guide
0101 + HOLD . You see:
By default, the attendant (extension 300) has Class of Service 1. All other extensions have Class
Vol Up until you see:
OR
CONF to return to step 3 and enter another Class of Service to program.
OR
CONF twice to exit program 0101.
1801 + HOLD . You see:
Vol Up until you see:
CONF and go back to step 3 to select another extension.
OR
CONF twice to exit program 1801.
Section 2: Customizing Features
HOLD . You see:
Section 2: Customizing Features
9 (for yes) + Vol Up .
6 (for no) + Vol Up .
HOLD . You see:
HOLD . You see:
2-21
2