Installing The Engine - Yamaha FJR1300N 2001 Service Manual

ENGINE
EAS00192

INSTALLING THE ENGINE

1. Install:
• spacer 1
• spacer bolt 2
• rear lower mounting bolt 3
• rear upper mounting bolt 4
• front mounting bolts 5, 6
• engine bracket 2 7
• engine bracket 1 8
NOTE:
@
Do not fully tighten the bolts.
2. Tighten the bolts in the following order.
• front mounting bolts (left) 5
• rear lower mounting bolt 3
• spacer bolt 2
• nut 9
• front mounting bolts (left) 5
• front mounting bolts (right) 6
• pinch bolts 0
• pinch bolt A
NOTE:
• Tighten the spacer bolt 2 to specification
with a pivot shaft wrench B.
• When tightened, the spacer bolt 2 should be
flat against the engine surface.
Pivot shaft wrench
90890-01471
3. Temporarily
bracket 2 and engine) 1 and bolts (engine
bracket 2 and frame) 2.
NOTE:
When temporarily tightened, the bolts 1, 2
should be flat against the engine and frame
surface.
5 - 6
ENG
55 Nm (5.5 m · kg)
45 Nm (4.5 m · kg)
18 Nm (1.8 m · kg)
45 Nm (4.5 m · kg)
55 Nm (5.5 m · kg)
55 Nm (5.5 m · kg)
24 Nm (2.4 m · kg)
24 Nm (2.4 m · kg)
tighten the bolts (engine