CLUTCH
EAS00281
CHECKING THE CLUTCH PLATES
The following procedure applies to all of the
clutch plates.
1. Check:
• clutch plate
Damage → Replace the clutch plates as a
set.
2. Measure:
• clutch plate warpage
(with a surface plate and thickness gauge
1)
Out of specification → Replace the clutch
plates as a set.
Maximum
Maximum clutch plate warpage
0.1 mm
EAS00283
CHECKING THE CLUTCH SPRING PLATE
1. Check:
• clutch spring plate 1
Damage → Replace.
2. Check:
• clutch spring plate seat 2
Damage → Replace.
EAS00284
CHECKING THE CLUTCH HOUSING
1. Check:
• clutch housing dogs
Damage/pitting/wear → Deburr the clutch
housing dogs or replace the clutch housing.
NOTE:
@
Pitting on the clutch housing dogs will cause
erratic clutch operation.
2. Check:
• bearing
Damage/wear → Replace the bearing and
clutch housing.
5 - 50
ENG