Special Tools - Yamaha FJR1300N 2001 Service Manual

EAS00027

SPECIAL TOOLS

The following special tools are necessary for complete and accurate tune-up and assembly. Use
only the appropriate special tools as this will help prevent damage caused by the use of inappropri-
ate tools or improvised techniques. Special tools, part numbers or both may differ depending on the
country.
When placing an order, refer to the list provided below to avoid any mistakes.
Tool No.
Bolt
90890-01083
Weight
90890-01084
90890-01229
90890-01230
90890-01235
90890-01304
Tester
90890-01325
Adapter
90890-01352
Puller
90890-01362
Tool name/Function
Slide hammer bolt
Weight
These tools are needed to remove the
main axle assembly.
Coupling gear/middle shaft tool
This tool is needed when removing or
installing the coupling gear nut.
Final gear backlash band
This tool is needed when measuring the
final gear backlash.
Rotor holding tool
This tool is needed to hold the camshaft
sprocket when loosen or tighten the
camshaft sprocket bolts.
Piston pin puller set
This tool is used to remove the piston
pin.
Radiator cap tester
Radiator cap tester adapter
This tester and its adapter are needed
for checking the cooling system.
Flywheel puller
This tool is needed to remove the rotor.
SPECIAL TOOLS
1 - 38
GEN
INFO
Illustration