Section 9
Establishing connection and verifying the IEEE C37.118/1344 communication
IEC140000140 V1 EN-US
Figure 12:
•
Switch to the Protocol Specific tab. Here, all the IEEE C37.118 message types can be seen. If the
HeaderFrame is not included, ask the PMU to send the header frame via the Send Header Frame
command (Previous stage). Open each message type and observe the content of each message.
68
Drop-down menu with commands for testing the PMU
© 2017 - 2021 Hitachi Power Grids. All rights reserved
1MRK 511 403-UUS Rev. K
IEC140000140-1-en.vsd
Bay control REC670
Commissioning manual