Completing The Test - ABB Relion 670 Series Commissioning Manual

Hide thumbs Also See for Relion 670 Series:
Table of Contents

Advertisement

1MRK 511 403-UUS Rev. K
7.
Activate the BLOCK binary input.
8.
Activate the CRL binary input.
9.
Switch off the polarizing voltage and reset the BLOCK and CRL binary input.
If setting WEI = Echo & Trip
1.
Inject the polarizing voltage 3V0 to about 90% of the setting ( 3V0PU ) operating voltage.
2.
Activate the CRL binary input.
3.
Increase the injected voltage to about 110% of the setting ( 3V0PU ) operating voltage.
4.
Activate the CRL binary input.
5.
Check that the ECHO, CS and TRWEI appear on the corresponding binary output or on the local
HMI.
6.
Reset the CRL binary input.
7.
Activate the BLOCK binary input.
8.
Activate the CRL binary input.
9.
Reset the CRL and BLOCK binary input.
10.
Inject the polarizing voltage 3V0 to about 110% of the setting (3V0PU>) and adjust the phase angle
between the voltage and current to (180°- AnglRCA) setting, the current leads the voltage.
11.
Inject current in one phase to about 110% of the set trip current ( INDir).
12.
Activate the CRL binary input.
13.
Abruptly reverse the current to 65° lagging the voltage to trip the forward directional element.
14.
Switch the current off and check that the ECHO, CS and TRWEI appear on the corresponding
binary output during 200ms after resetting the directional element. If EF4PTOC also trips in forward
direction, CS should be obtained.
15.
Switch the polarizing voltage off and reset the CRL binary input.
11.11.5.3

Completing the test

Continue to test another function or end the test by changing the TESTMODE setting to Disabled.
Restore connections and settings to the original values, if changed for testing purposes.
Bay control REC670
Commissioning manual
No ECHO and CS should appear.
No ECHO, CS and TRWEI outputs should appear.
No ECHO, CS and TRWEI outputs should appear.
No ECHO and TRWEI should appear.
No ECHO and TRWEI should appear.
© 2017 - 2021 Hitachi Power Grids. All rights reserved
Section 11
Testing functionality by secondary injection
M13936-52 v12
M13936-90 v5
195

Advertisement

Table of Contents
loading

This manual is also suitable for:

Relion rec670

Table of Contents