Led - Toshiba V Series User Manual

Integrated controller
Hide thumbs Also See for V Series:
Table of Contents

Advertisement

Chapter 3 Hardware
3.2 LED Indicators
The descriptions of indications of the LED indicators are given in Table 3-1.
3

LED

Name
RUN
(green)
LINK
(green)
TX
(green)
RX
(green)
LNT
(green)
PER
(red)
I/O
(green)
Note1: TX and RX indications are integrated in a 10BASE-T connector.
6
Table 3-1 Descriptions of Indications of LED Indicators
Description of Indication
Indicates that this module's hardware
is normal.
ON: The module is normal.
OFF: The module is defective or
power is OFF.
Indicates connection to the FL-net
network.
ON: Connected to the network
OFF: Disconnected from the network
ON: Under transmission
ON: Data is being received.
Indicates the 10BASE-T link test
condition.
ON: Accepted
OFF: Failed
Indicates the condition of parameter
setting.
ON: Improper
OFF: Proper
Indicates that the FL654 is accessing
connected I/O module(s).
ON: Accessing
OFF: Not accessing
Blinking: Updating of the overall
listener area of the local
station has stopped for more
than 500 ms.
FL654
○RUN
○LNK
○LNT
○PER
○I/O
Figure 3-2 LED Indicators
Possible Cause in Details
The causes of LED OFF are as follows:
・ No power is supplied.
・ The node address is "00," "FF," or
duplicated with another node.
・ Software abnormality
・ Hardware abnormality
The causes of LED OFF are as follows:
・ Parameter(s) is incorrect or is not set.
・ Defective transmission line
・ LED lights when transmission is made
from the local node.
・ LED lights when the local node receives
frames from another node.
The cause of LED OFF is as follows:
・ Hub or 10BASE-T cable is defective.
The causes of LED lighting are as follows:
・ A parameter is not yet set.
・ Incorrect parameter format
・ The cyclic transmission sending area is
overlapped with that of another node.
The causes of extinguishment are as
follows:
・ No power is supplied.
・ Module hardware is defective.
・ FL654 is not connected to the FL-net line
or the RUN/HALT switch is in HALT.
Model 2000 FL-net (OPCN-2) Remote I/O Station Module (FL654) User's Manual
Indication
in Normal
Status
ON
(green)
ON
(green)
ON
(green)
ON
(green)
ON
(green)
OFF
ON
(green)

Advertisement

Table of Contents
loading

This manual is also suitable for:

2000 fl-netOpcn-2Fl654

Table of Contents