Preparing Remote I/O Modules; Setting The Transmission Parameters - Toshiba V Series User Manual

Integrated controller

Hide thumbs Also See for V Series:

Table of Contents

Chapter 9 Startup Using V-Tool

9.2.5 Preparing Remote I/O Modules

This section prepares the FL654 for downloading I/O configuration information to it.

(1) Preparation for download

Set up the transmission parameters for communications between the V-Tool and FL654.

(1) Click on the "Tool" menu in the System View/Station Status screen to display the

(2) In this menu, click on the "Set Transmission Parameters" item. The Set Transmission

(3) Always select the "Network over RS-232C" radio button in the Transmission Means

(4) If download is made in remote connection, set the timeout time for transmission over

(a) Set the FL654 operation setting switch so that SW3 is ON and SW4 is OFF (TOOL

specification).

(b) Turn ON the power.

menu.

Parameters screen appears.

section.

RS-232C to 10 sec or more.

Model 2000 FL-net (OPCN-2) Remote I/O Station Module (FL654) User's Manual

Table of Contents

2000 fl-net Opcn-2 Fl654