Terminal Mode Descriptions; Log-In/Log-Out - Panasonic WJ-SX 150A Operating Instructions Manual

TERMINAL MODE DESCRIPTIONS

In the terminal mode, each external device (such as a cam-
era, monitor, system controller, or a recorder, etc.) has the
name and number (Camera 1, etc.). When you control a
device, you are to select the device number and execute the
selection. For example, before controlling Camera 1, you will
press the numeric button 1, and then press the CAM (SET)
button. Each operator has a level and priority. When you try
to control a device beyond the level and priority, the PRO-
HIBITED or BUSY indicator will light up to inform you that you
cannot control it.

Log-in/Log-out

Before starting the system operation, it is necessary to input
an operator ID and a password from a system controller.
The system identifies the operator ID and password by com-
paring the registered data. If the ID and password are cor-
rect, the system will enter the operation mode.
This identification is called log-in. On the contrary, the termi-
nation of the system operation is called log-out.
Log-in/log-out has two ways: One is the manual log-in/log-out
and the other is auto log-in/out.
Through the auto log-in, an operator can login the system
without entering a password, after turning the power on.
Through the auto log-out, an operator can logout of the sys-
tem when not operating the system for a fixed time.
The way of log-in/log-out and the time for auto log-out is con-
figurable when setting up the system.
When configuring the auto log-in, it is necessary to assign an
operator ID to each data port.
Operator Registration
When operating the system, the operator registration is nec-
essary.
Up to 16 operators can be registered and filed by their oper-
ator IDs.
They are registered in SETUP MENU and WJ-SX150A
Administrator Console.
• Description of Operator Registration
Operator 1
ID 150
Password 150
Level 1
Priority 1
Camera Operation 1
*n is a number.
14
Operator 2 Operator 3 Operator 4 Operator 5
1 100 101
12345 100 101
1 1 1
2 3 4
1 1 1
The following are the properties, which can prevent the oper-
ation conflict.
Level Setting
16 operators are classified in the level from 1 (the highest) to
3 (the lowest).
A higher-level operator can control more functions.
Password Setting
Up to 5 digit numbers can be registered as a password.
When an operator logs in, the system identifies the operator
ID and password by comparing the registered data.
If they are correct, the operator can control the system.
Priority Setting
The system classifies the operators in priority from 1 to 16.
This setting includes the control coverage that is configured
by level, and the priority in case of the conflict with the same-
level operator.
Operable Cameras and Sequences
This setting assigns each operator the cameras and
sequences operable by the level.
Notes:
• Each operator's ID, password, level and priority need to
be configured in SETUP MENU and WJ-SX150A
Administrator Console.
• Auto log-in/log-out
Administrator Console.
• The level and priority are assigned to each operator.
Operators cannot control the system beyond the assign-
ment.
Even within the level and priority, a device controlled by
a higher-level operator is not operable.
• Manual log-in/log-out or auto log-in/log-out is assignable
to the system controllers Terminal – K1 to K4.
• • •
Operator 6 Operator n* (Max 16)
102 103 –
102 103 –
2 3 –
5 6 –
1 1 –
is configurable in
Level Table
SX150A Setup
Items operable by
Camera Setup
the level are set to
Program Preset Position
ON.
Camera Control
Camera Selection
Recorder Setup
Recorder Control
Camera Operation Level
1: This level can select and control the camera.
2: This level can only select the camera.
3: This level can neither select nor control the camera.
WJ-SX150A