Panasonic WJ-SX 150A Operating Instructions Manual page 72

740 CAMERA/DATA1-4 PORT
SWITCHER=MASTER(5 of 5)
PORT MODE
CAMERA TERMINAL-K1
DATA1 TERMINAL-K2
DATA2 TERMINAL-K3
DATA3 MASTER-SLAVE
DATA4 PS-DATA
HDR HDR
SERIAL PC
Master unit setting for Master-Slave connection
740 CAMERA/DATA1-4 PORT
SWITCHER=SLAVE1(1 of 5)
PORT MODE
CAMERA CAMERA
DATA1 CAMERA
DATA2 CAMERA
DATA3 CAMERA
DATA4 MASTER-SLAVE
HDR HDR
SERIAL --
Slave unit setting for Master-Slave connection
SWITCHER: Select a unit (SLAVE1 to 4 and MASTER*) to
configure the parameters.
* In normal connection, only MASTER is displayed.
The factory default setting is same as the illustration.
PORT: This stands for the type of a port.
CAMERA: RS-485 Camera port
DATA 1/2/3/4: DATA 1/2/3/4 ports
HDR: DATA HDR port
SERIAL: SERIAL port
MODE: This stands for the operation mode of a port.
CAMERA: Select this if a camera is connected.
TERMINAL-K1/K2/K3/K4: Select this if a terminal-mode
system controller is connected.
PS·DATA: Select this if a PS·DATA system controller is
connected.
MASTER-SLAVE: The port used for the master-slave
connection is fixed to this parameter.
HDR: The HDR port is fixed to this parameter.
PC: WJ-SX150A Administrator Console configuration
and firmware update becomes available with a PC
connection.
VCR: Select this if a time-lapse VCR (Panasonic model)
is connected.
– – –: This port is unusable.
The following are MODE parameters assigned to
each port.
75
SPEED
9600bps
9600bps
9600bps
38400bps
9600bps
9600bps
38400bps
SPEED
19200bps
19200bps
19200bps
19200bps
38400bps
9600bps
38400bps
Master
Port
Normal connection
CAMERA CAMERA
TERMINAL-K1/K2/
DATA 1 K3/K4
CAMERA
TERMINAL-K1/K2/
DATA 2 K3/K4
CAMERA
TERMINAL-K1/K2/
DATA 3 K3/K4
CAMERA
TERMINAL-K1/K2/
DATA 4 K3/K4
PS DATA
·
HDR HDR
PC
SERIAL
VCR
The factory default setting is same as the illustration.
SPEED: This stands for the communication speed of a port.
38400 bps*: Select this to set the speed to 38400 bps.
19200 bps: Select this to set the speed to 19200 bps.
9600 bps: Select this to set the speed to 9600 bps.
4800 bps: Select this to set the speed to 4800 bps.
* This parameter is available only for SERIAL.
The factory default setting is same as the illustration.
Notes:
• If the DATA 4 is set to PS·DATA, SPEED of PS·DATA will
be changed in conjunction with that of HDR.
• When you change MODE, the default communication
speed is automatically set. The SERIAL port is set to the
default speed when CONTROL is changed in 600
RECORDER. (Refer to p. 71.)
The default communication speeds are shown in the dia-
gram.
MODE
CAMERA
TERMINAL
PS·DATA
HDR
PC
VCR (VTR)
Slave 1
to 4
Master-slave connection
TERMINAL-K1/K2/
K3/K4 CAMERA
CAMERA
TERMINAL-K1/K2/
K3/K4 CAMERA
CAMERA
TERMINAL-K1/K2/
K3/K4 CAMERA
CAMERA
MASTER-SLAVE CAMERA
TERMINAL-K1/K2/
MASTER-
K3/K4
SLAVE
PS DATA
·
HDR HDR
PC – – –
VCR VCR
Factory default setting
19200 bps
9600 bps
9600 bps
9600 bps
38400 bps
9600 bps