Panasonic WJ-SX 150A Operating Instructions Manual page 200

Available controls and functions
<Main unit>
Shuttle ring clockwise: Moves to the next page.
Shuttle ring counterclockwise: Moves to the previous
page.
JogDial clockwise or counterclockwise: Moves the
cursor.
+ or – button: Moves the cursor.
PLAY/PAUSE button: Starts playback of the record
pointed by the cursor.
MON (ESC) or EXIT button: Exits the search mode
and returns to the upper menu.
F1 button: Changes the monitor display to the list.
<3D joystick unit>
3D joystick upward (D): Moves the cursor to the left.
3D joystick downward (C): Moves the cursor to the
right.
3D joystick leftward (A): Moves the cursor to the left.
3D joystick rightward (B): Moves the cursor to the
right.
Zoom wheel controller to the right: Moves to the next
page.
Zoom wheel controller to the left: Moves to the previ-
ous page.
■ Disk Selection
You will specify a disk of recorder for search playback.
1. Enter the recorder mode. (Refer to p. 19 Recorder
Mode.)
2. Press the MENU button repeatedly repeatedly until
"HD300 DiskSelect" appears on the LCD.
HD300 DiskSelect 302
Nr-A Cp-A Cpy1 Cpy2
3. Press one of the F1 to F4 buttons.
The specified disk will be selected.
Available buttons and functions
F1: Nr-A
Specifies the normal or event recording area for play-
back.
F2: Cp-A
Specifies the copy area for playback.
F3: Cpy1
This button is reserved for future use.
F4: Cpy2
This button is reserved for future use.
MON (ESC)
Cancels search playback and recovers the default LCD
status.
EXIT
Cancels search playback and recovers the default LCD
status.
28
4. When you specify a disk, the search list display will
appear on the active monitor, and "Search Mode" menu
will appear on the LCD. Then, perform the search play-
back operation. (Refer to p. 23 Search Playback.)
Search Mode
Thumb
■ A - B Repeat Playback
You can playback the recorded images repeatedly by
specifying the start point (A) and end point (B).
1. Enter the recorder mode. (Refer to p. 19 Recorder
Mode.)
2. Press the MENU button repeatedly until "HD300 A – B
repeat" appears on the LCD.
HD300 A—B Repeat 303
Start End
Note: To cancel the setting and exit "HD300 A – B
repeat", press the MON (ESC) or EXIT button. The
LCD display will return to the default status.
3. During playback, press the F1 button at the point you
wish to start playback. The playback start point (A) will
be set.
Note: To cancel the start point, press the F4 button.
4. Press the F2 button at the point you wish to end play-
back. The playback end point (B) will be set, and the
repeat playback will be performed between (A) and (B).
■ Canceling Filters
During the filtering playback, the searching filter will be
temporarily canceled or recovered.
Notes:
• This function is available only during filtering playback.
• You can change the ON/OFF setting during playback
and playback pause.
1. Enter the recorder mode. (Refer to p. 19 Recorder
Mode.)
2. Press the MENU button repeatedly until "HD300 Listed"
appears on the LCD.
HD300 Listed
On Off
/HD300
Text Copy
Cancel
304