Basic Connection - Panasonic WJ-SX 150A Operating Instructions Manual

(2) ADDENDUM FOR MATRIX SWITCHER WJ-SX150 SERIES:
TO USE DIGITAL DISK RECORDER
WJ-HD300 SERIES/WJ-HD220 SERIES
SYSTEM CONNECTIONS AND SETUPS (WJ-HD300 SERIES/WJ-HD220 SERIES)
■ Connection with Digital Disk Recorder WJ-HD300 Series
Notes:
• Refer to service personnel for details on the connection with a recorder to operate via LAN or the Internet.
• Check that the firmware of recorder is Ver. 1.30 or later.
• Only one recorder can be connected to the DATA HDR connector of this unit. (Multiple unit connections, such as cascade
connection, are not available.)
● Basic Connection
The following is the description of the connection between a recorder and this unit to confirm the images from the recorder.
1. Set the unit address of the recorder to 1.
2. Set the [Camera control] setting to "PSD" for all cameras in SETUP MENU of the recorder.
3. Connect the unit's CAM OUT 1 to 16 connectors to the recorder's VIDEO IN 1 to 16 connectors with a coaxial cable.
4. Connect the unit's EXT IN connector to the recorder's MULTISCREEN OUT connector with a coaxial cable.
5. Connect the unit's DATA HDR connector to the recorder's DATA port with a modular cable.
MONITOR OUT x
* Connect these ports if you control cameras from the front panel of recorder.
** Set the recorder's unit address to 1.
Notes:
• Make sure the recorder's unit address is set to 1 through SETUP MENU or WJ-SX150A administrator Console. (Refer to this
unit's operating instructions.) If another number is selected, you cannot control the recorder.
• To control cameras at the front panel of recorder, connect the DATA 4 connector and the DATA port of recorder with a
modular cable. (PS·Data system controller is not connectable to the DATA 4 connector.)
• From system controllers connected to the unit (WJ-SX150A), you cannot control the monitor connected to the MONITOR
OUT 1 connector of recorder.
System controller
(Terminal Mode)
ALARM SERIAL
DATA HDR DATA 4 DATA 3 DATA 2 DATA 1
TERM
OFF ON
PS•DATA RS485(CAMERA)
16 15 14 13 12 11 10 9 8 7
IN
OUT
16 15 14 13 12 11 10 9 8 7
CAMERA
DATA HDR DATA 4*
(PS·Data)
DATA
1
3 1
SERIAL ALARM
CASCADE
4 2 OUT
2
AUDIO IN AUDIO OUT
MONITOR OUT CASCADE IN MONITOR (VGA) ALARM/CONTOROL
16 15 14 13 12 11 10 9 8 7
IN
OUT
16 15 14 13 12 11 10 9 8 7
VIDEO
Monitor
EXT IN
MONITOR OUT
EXT IN 3 1
SIGNAL GND
(PLAY IN)
CAMERA
RS485(CAMERA)
SW IN
LINE
SELECT
2 4
4 2
EXT OUT
MONITOR OUT
(REC OUT)
6 5 4 3 2 1
6 5 4 3 2 1
Matrix Switcher
SIGNAL GND
MODE
COPY 1
2 1
POWER
DATA RS485(CAMERA) 10/100BASE-T EXT STORAGE
6 5 4 3 2 1
AC IN
6 5 4 3 2 1
Recorder**
POWER
AC IN
37