Yamaha RS7000 Owner's Manual page 103

1 CUTOFF (Filter Cutoff Frequency)
[Settings] -64 ~ +63
Sets the filter cutoff frequency. Positive values move the cut-
off toward higher frequencies, while negative values move
the cutoff toward lower frequencies.
The effect of the cutoff frequency will vary according to the
selected filter type.
RESONANCE
2
........................................................[Knob 2]
[Settings] -64 ~ +63
Produces a resonant peak centered at the filter's cutoff fre-
quency.
When the BPF filter type is selected, higher resonance set-
tings produce a narrower passband at the cutoff frequency.
When the BEF filter type is selected, higher resonance set-
tings produce a narrower elimination band at the cutoff fre-
quency.
NOTE
Increasing the resonance excessively may
cause some voices to distort.
FILTER TYPE
3
........................................................[Knob 3]
[Settings] BYPASS, LPF24, LPF18, LPF12, HPF,
BPF, BEF
BYPASS ...........................The filter is OFF. The filter
Sets the filter type.
LPF24, LPF18, LPF12 ..... Low-pass filter
Passed frequencies
Cutoff frequency
Frequencies higher than the cutoff frequency are cut off.
Three cutoff slopes are provided — 24 dB/oct, 18 dB/oct, and
12 dB/oct — each with its own distinct sound.
HPF ..............................High-pass filter
Volume
Blocked
frequencies
Cutoff frequency
Frequencies lower than the cutoff frequency are cut off.
............[Knob 1]
Relative
Relative
Absolute
type indicators on the panel
will all be off.
Blocked frequencies
Frequency
Passed frequencies
Frequency
8. Changing the Sound of Voices (Voice Edit)
BPF .............................. Band-pass filter
Volume
Passed
Blocked
frequencies
frequencies
Center frequency
Frequencies around the center frequency are passed, while all
other frequencies are blocked.
BEF .............................. Band-elimination filter
Volume
Passed Blocked
frequencies frequencies
Center frequency
Frequencies around the center frequency are blocked, while
all other frequencies are passed.
NOTE
Some 2-element voices use a different filter
type for each element. The element-1 filter type
is displayed by default. If the filter type is
changed the filter types for both elements are
changed.
4 ENV. DEPTH (Envelope Depth)
[Settings] -64 ~ +63
Sets the depth of the filter envelope set via the FEG display
(Page 101). Negative settings invert the filter envelope.
Blocked
frequencies
Frequency
2
Passed
frequencies
Frequency
.................. [Knob 4]
Relative
RS7000 103