Yamaha RS7000 Owner's Manual page 119

Display Parameters
FILE TYPE = PATTERN, CARD or DISK = CARD
1 4 2
[Knob 1] [F1] [Knob 2]
FILE TYPE = PATTERN, CARD or DISK = SCSI
1 4 2
[Knob 1] [F1] [Knob 2]
FILE TYPE = ALL, CARD or SCSI = CARD
1 4
[Knob 1] [F1]
FILE TYPE
1
..............................................................[Knob 1]
[Settings] PATT, ALL
Specifies the type of data file to be saved.
For descriptions of the various file types see "About File
Types" on page 116.
[PATTERN] → [SAVE]
Icon
Available
3
[F4]
Disk Type
Available
SCSI ID
Icon
Partition Name
3
[F4]
Available Icon
3
[F4]
12. Saving to Memory Card or Disk
2 PATTERN
.............................................................. [Knob 2]
[Settings] Style ..... 01 ~ 64
Selects the pattern to be saved.
This parameter is not available when the FILE TYPE param-
eter is set to "ALL".
NOTE
Empty styles which contain no data cannot be
saved.
SCSI/CARD
3
................................................................... [F4]
[Settings] SCSI, CARD
SCSI .............. The hard disk, ZIP disk, or other
SCSI disk connected to the SCSI
connector.
CARD ............ A memory card inserted in the
card slot.
Selects the disk or card to which the data is to be saved.
When CARD is selected and a properly formatted memory
card is in the card slot, a memory card icon will appear along
with the available memory on the card.
When SCSI is selected and a properly formatted disk is con-
nected to the SCSI connector, a disk icon will appear along
with the disk description, SCSI ID number, partition name,
and amount of available space in the partition.
4 OK
..................................................................................... [F1]
Switches to the save execution page.
I Save Execution Page
0
[F1]
5 FILE NAME
........................................................... [Knob 1]
Moves the cursor for file-name entry.
Use [Knob 1] to move the cursor to the desired character
position, then use the keyboard to enter the desired character.
Refer to "Chapter 1: Basics", page 67, for character-entry
details.
[PATTERN] → [SAVE] → [F1]
RS7000 119
2