Mix Track - Yamaha RS7000 Owner's Manual

13. The Song Jobs
Track, Track
1 2
[Settings] Track 01 ~ 16
Specify the two tracks between which data will be exchanged.
3 Data Type
[Settings]
SEQ EVENT
All events in the track.
PLAY FX/GROOVE/MIDI DELAY
The track's PLAY FX. GROOVE, and MIDI DELAY set-
tings.
MIXER/VOICE EDIT
The track's mixer and voice edit settings.
Determine the type(s) of data to be exchanged. When a
checkbox is checked the corresponding data type will be
exchanged.

22 Mix Track

This job mixes all data from two selected tracks — "a" and "b"
— and places the result in track "b".
Track "a"
NOTE
If this job is applied to a track which uses a sample
voice, only the note data used to play the sample
voice will be mixed. The sample voice itself will not be
mixed.
1 2
2
1 Track a
[Settings] 01 ~ 16
Specifies track "a".
222 RS7000
Track "b"
Mix track
Track "b"
Track "a" Track "b"
[Knob 2] [Knob 3]
Track b
2
[Settings] 01 ~ 16
Specifies track "b".
This job deletes all data of the selected type from the selected
track, or from all tracks.
2
1 Source Track
[Settings] 1 ~ 16, BPM, SCENE, ALL
Data Type
2
[Settings]
SEQ EVENT
All events in the track.
PLAY FX/GROOVE/MIDI DELAY
The track's PLAY FX. GROOVE, and MIDI DELAY set-
tings.
MIXER/VOICE EDIT
The track's mixer and voice edit settings.
SAMPLE
The sample voice assigned to the selected track.
Determine the type(s) of data to be cleared. When a checkbox
is checked the corresponding data type will be cleared.
NOTE
• Undo/Redo cannot be used to undo/redo
(Page 213) a sample voice clear operation.
• When the "Sample" box is checked and the
[F4] (DO!) button is pressed, the "Are You
Sure? Cancel [F2]/OK [F3]" confirmation
prompt will appear. [F3] will execute the Clear
Track job.
[F4]
24 Normalize Play Effect
This job rewrites the data in the selected track so that it incorpo-
rates the current Play FX/Groove/MIDI Delay settings.
23 Clear Track
1
[Knob 2] [Knob 3] [F4]