Loading From Memory Card Or Disk - Yamaha RS7000 Owner's Manual

5. Loading from Memory Card or Disk

This sub mode is used to load data from a memory card or disk.
3 display pages are provided: Load, Import, and SCSI Setup.
Press [LOAD] from the PATTERN Chain mode to go to the Load display.
NOTE
Refer to "Chapter 2: The Pattern Mode", page 116, for information about file types.
Load Page Structure
The LOAD sub-mode includes the following display pages.
G Load...(Page 169)
Loads data into the internal memory from memory card or disk.
G Import...(Page 170)
This import functions are not available from the PATTERN chain
mode.
G SCSI Setup...(Page 170)
Provides access to a number of SCSI settings.

5. Loading from Memory Card or Disk

[1] Load Page
Loads data to internal memory from a memory card or disk.
Details are the same as for the PATTERN mode LOAD page
(Page 126). Only parameters that are different from the PAT-
TERN mode will be introduced here.
Display Parameters
CARD or DISK = CARD
2 1
[F1] [Knob 2]
CARD or DISK = SCSI
Partition Name
Disk Type
SCSI ID
Icon
2 1
[F1] [Knob 2]
[PATT CHAIN] → [LOAD]
3
[F4]
3
[F4]
RS7000 169
3