Yamaha RS7000 Owner's Manual page 37

The Save Procedure
While pattern playback is stopped, press the [SAVE] button from the PATTERN Play or Patch wode to go to the Save page.
1.
PATT
PATTERN SONG
CHAIN
SUB MODE
GROOVE PLAY FX MIDI DELAY
7 8 9
VOICE EDIT EFFECT SETUP
4 5 6
EXIT
SAVE LOAD JOB
1 2 3
Use [Knob 1] (FILE TYPE) to select "PATT" if it isn't already selected.
2.
Use [Knob 2] (PATTERN) to select the style to be saved — "01" should already be selected.
3.
Press [F4] (CARD/SCSI) to specify whether you want to save to a memory card or disk. [F4] alternately selects "CARD" and
4.
"SCSI".
Press [F1] (OK) to go to the save execution page.
5.
Use [Knob 1] (FILE NAME) and the keyboard to enter a file name: [Knob 1] moves the file name cursor right or left to the
6.
desired character location, and the keyboard enters the corresponding character at the cursor location. The characters entered
by the black keys are listed above the keys, and those entered by the white/gray keys are listed below the keys. The second
white/gray-key characters are entered by pressing the key while holding the [SHIFT] button. Numbers can be entered via the
SUB MODE buttons.
Use [Knob 3] to select "CurrentDir" at the top of the list to save to the currently open folder. If the selected memory card or
7.
disk contains multiple folders, use [Knob 3] to select the folder to which the file is to be saved. As necessary use [F3](
[F4](OPEN) to move between folders, or [F2](NEW) to create a new folder.
Press [F1](SAVE) to execute the save operation.
8.
If a file with the same file name already exists on the card or disk, the "Overwrite? NO[F2]/YES[F3]" confirmation message
will appear.
Press [F3] if it is OK to overwrite the existing file and replace it with the new file. Press [F2] to cancel the save operation and
return to the status prior to pressing the [F1] button (step 5, above).
9. Press [EXIT] twice to return to the PATTERN Play or Patch display.
UTILITY
MIXER
MASTER EFFECT
MULTI COMP RING MOD REAL TIME
EFFECT ON/OFF CTRL DELAY V-DIST LOOP
REMIX
D-FILTER LO-FI
ISOLATION SLICE
SEQUENCE PLAY FX
+ -
/
BEAT STRETCH CLOCK SHIFT
GATE TIME MIDI DELAY VELOCITY
LFO
WAVE
MASTER
S&H
SPEED USER
PGM
PITCH
PORTAMENTO
PITCH BEND PORTAMENTO TIME
F1 F2 F3 F4
NUM
BPM
REC STOP PLAY
SHIFT
0
MUTE
KEY- ARPEGGIO OCT OCT MEMORY
BOARD ON DOWN UP STORE SCENE 1 2 3 4 5 EXIT
SECTION A B C D E F G H
EDIT
TRANSPOSE
CAPS ALL 1~8 9~16 TR- TR+
1 2 3 4 5 6 7 8 9 10 11
TRACK
MUTE
SOLO
K ! L # M $ N % O & P ' Q ( R ) S - T @ U ^
TRANSPOSE(-) TRANSPOSE(+)
TRACK 3.3V CARD
SELECT
ENTER
2. Assemble a Pattern Using Preset Phrases
MUSIC PRODUCTION STUDIO
Integrated Sampling Sequencer
SAMPLING
SAMPLE
EDIT STANDBY IN
OUT A
OUT B
START/STOP
REC VOLUME MIDI MASTER VOLUME
EFFECT SEND / VOLUME
SELECT
SWING DRY VARI DELAY/CHO REVERB TRACK VOLUME
EG
AMP
FILTER
DEPTH PITCH ATTACK DECAY SUSTAIN RELEASE
FILTER
- +
TYPE LPF24
FINGERED TYPE LPF18
FULL TIME LPF12
OFF HPF
CUTOFF RESONANCE ENV.DEPTH BPF
BEF
MODE
PATT
PATTERN CHAIN SONG UTILITY UTILITY
SYSTEM MIDI SETUP
MIDI FILTER
SUB MODE
GROOVE PLAY FX MIDI DELAY MIXER GROOVE PLAY FX MIDI DELAY MIXER
GRID GROOVE HARMONIZE MIDI DELAY VOICE SELECT
NOTE TIME FEEDBACK EQ VOL/PAN/OUT
EFFECT SEND
7 8 9 + / - LEVEL
VOICE EDIT EFFECT SETUP MASTER VOICE EDIT EFFECT SETUP MASTER
LFO EFFECT TYPE ARPEGGIO MASTER EQ
PORTAMENTO VARIATION A/D SETUP MASTER
EG PITCH REVERB DELAY KNOB ASSIGN MIDI OUT CH EFFECT
4 5 6 0 FILTER
SAVE LOAD JOB EDIT SAVE LOAD JOB EDIT
SAVE LOAD JOB LIST EDIT CHANGE
EXPORT IMPORT VIEW FILTER
RENAME DELETE SCSI SETUP SCSI COMM
1 2 3 ENTER FORMAT
I J
TAP
PAD 1 PAD 2
PAD ASSIGN
12 13 14 15 16
SPACE DEL
V _ W { X } Y ~ Z
T
UTORIAL
)
RS7000 37