Yamaha RS7000 Owner's Manual page 210

12. Loading from Memory Card or Disk
NOTE
• When the SMPL file type is selected the song
to which the data will be loaded cannot be
selected from this display. To change the
song number return to the SONG Play mode
and select the desired song, then return to
this display page.
• When the load operation is executed, any
existing data in the selected song number or
sample voice number will be overwritten.
(UP)
6
...........................................................................[F1]
OPEN
7
................................................................................[F2]
LOAD!
8
..............................................................................[F4]
Loads sequence or sample data which was saved to a SCSI disk
or memory card by other music equipment or a personal com-
puter.
Features and details are the same as in the PATTERN mode (Page
129).
In this section we'll describe only parameters which are different
from the PATTERN mode.
Display Parameters
CARD or SCSI = CARD
2
[F1]
CARD or SCSI = SCSI
Partition Name
SCSI ID
Disk Type
2
[F1]
210 RS7000
[2] Import Page
[SONG] → [LOAD] × 2
1
[Knob 2] [F4]
Icon
1
[Knob 2]
FILE TYPE
1
[Settings] SAMPLE, SMF, RM1x SONG
SAMPLE ...........Sample data, WAV files, WAV files
SMF (Standard MIDI File)
..........................Sequence data can be loaded into the
RM1x SONG .....Song data saved in RM1x pattern for-
Specifies the type of data file to be imported.
Some imported samples may play at an unexpected pitch,
loop playback may change, or the sound quality may vary.
When an RM1x SONG file is imported the voice edit and
effect settings will not be reproduced. Some voices may also
change.
For details about the various file types see "About File
Types" on page 116.
SCSI/CARD
2
OK
3
..................................................................................... [F4]
I Import Execution Page
FILE TYPE = SAMPLE
4
[Knob 1]
3
3
[F4]
............................................................. [Knob 2]
(.WAV) and AIFF files (.AIF) can be
loaded into the specified internal sam-
ple voice number.
currently selected pattern from an
SMF (Standard MIDI File, format-0 or
1) type file.
mat can be loaded into the currently
selected RS7000 song.
................................................................... [F1]
[SONG] → [LOAD] × 2 → [F4]
Sample Voice Number
7 8 5
[F1] [F2] [Knob 3]
9 6
[F4] [Knob 4]