Connecting A Footswitch; Connecting External Midi Devices - Yamaha RS7000 Owner's Manual

I Connecting to a Mixer
Connect the output jacks (L/MONO, R) to two channels of the
mixer. The channel connected to the L/MONO jack should be
panned left, and the channel connected to the R jack should be
panned right.
INPUT OUTPUT
SW CONTRAST R L R L/MONO
CAUTION
Do not connect the output jacks of the RS7000
to the mic input jacks of an amp or cassette
deck etc. If they are connected to mic inputs,
the sound quality may be impaired, and the
device may be damaged. Also, when connect-
ing the RS7000 to a mixer or similar device, set
the mixer channels to Line Input sensitivity.

Connecting a Footswitch

When using an optional FC4 or FC5 footswitch, insert the foot-
switch plug into the FOOT SW jack located on the rear panel.
The footswitch function is determined by the UTILITY mode
SYSTEM page FOOT SWITCH parameter (Page 257).
THAT MAY CAUSE UNDESIRED OPERATION.
INPUT
SCSI FOOT SW CONTRAST R L
PHONES
OUTPUT
R L/MONO PHONES

Connecting External MIDI Devices

I Connecting a tone generator module
RS7000 sequence playback data can be used to play an external
tone generator module. Use a MIDI cable to connect the MIDI
OUT connector on the rear panel to the MIDI IN connector of the
external MIDI device.
MUSIC PRODUCTION STUDIO
Integrated Sampling Sequencer
MASTER EFFECT SAMPLING
MULTI COMP RING MOD REAL TIME
EFFECT CTRL DELAY V-DIST LOOP SAMPLE
ON/OFF REMIX EDIT STANDBY IN
D-FILTER LO-FI
OUT A
ISOLATION SLICE
OUT B
START/STOP REC VOLUME MIDI MASTER VOLUME
SEQUENCE PLAY FX EFFECT SEND / VOLUME
SELECT
MIDI OUT
BEAT STRETCH CLOCK SHIFT SWING DRY VARI DELAY/CHO REVREB TRACK VOLUME
GATE TIME MIDI DELAY VELOCITY
LFO EG
WAVE
AMP A or B
FILTER
S&H
SPEED USER DEPTH PITCH ATTACK DECAY SUSTAIN RELEASE
PGM
PITCH FILTER
PORTAMENTO - +
TYPE LPF24
FINGERED TYPE LPF18
FULL TIME LPF12
OFF HPF
BPF
PITCH BEND PORTAMENTO TIME CUTOFF RESONANCE ENV.DEPTH BEF
F1 F2 F3 F4
MODE
PATTERN PATT SONG UTILITY UTILITY
NUM CHAIN
MIDI SETUP SYSTEM
MIDI FILTER
BPM SUB MODE
GROOVE PLAY FX MIDI DELAY MIXER GROOVE PLAY FX MIDI DELAY MIXER
GRID GROOVE HARMONIZE MIDI DELAY VOICE SELECT
REC STOP PLAY NOTE FEEDBACK VOL/PAN/OUT
TIME EQ
+ - EFFECT SEND
7 8 9 / LEVEL
VOICE EDIT EFFECT SETUP MASTER VOICE EDIT EFFECT SETUP MASTER
SHIFT LFO EFFECT TYPE ARPEGGIO MASTER EQ
PORTAMENTO VARIATION A/D SETUP MASTER
MUTE PITCH DELAY KNOB ASSIGN EFFECT
EG REVERB MIDI OUT CH
KEY- ARPEGGIO OCT OCT MEMORY 4 5 6 0 FILTER
BOARD ON DOWN UP STORE SCENE 1 2 3 4 5 EXIT SAVE LOAD JOB EDIT SAVE LOAD JOB EDIT
SAVE LOAD JOB LIST EDIT CHANGE
EXPORT IMPORT VIEW FILTER
RENAME SCSI SETUP
DELETE SCSI COMM
1 2 3 ENTER FORMAT
SECTION A B C D E F G H I J
TAP
PAD 1 PAD 2
TRANSPOSE
CAPS
ALL 1~8 9~16 TR- TR+ PAD ASSIGN
TRACK 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16
MUTE
SPACE DEL
SOLO
K ! L # M $ N % O & P ' Q ( R ) S - T @ U ^ V _ W { X } Y ~ Z
TRANSPOSE(-) TRANSPOSE(+)
TRACK 3.3V CARD
SELECT
I Connecting a MIDI keyboard
Real-time recording input will be easier if you use a MIDI key-
board.
Use a MIDI cable to connect the MIDI OUT of the external MIDI
keyboard to the MIDI IN connector on the rear panel.
THIS CLASS B DIGITAL APPARATUS COMPLIES WITH
MUSICAL INSTRUMENT
MIDI CET APPAREIL NUMÉRIQUE DE LA CLASSE B EST C
379U
DU CANADA.
US LISTED
IN
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
N
: RISQUE DE CHOC ÉLECTRIQUE NE PAS OUVRIR.
O REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, OUT A
DO NOT EXPOSE THIS PRODUCT TO RAIN OR MOISTURE.
MODEL SER. NO.
OUT B
MADE IN JAPAN
I Connecting to an MTR (Multi-track Recorder)
Since the RS7000 implements MTC (MIDI Time Code) and
MMC (MIDI Machine Control), you can produce music while
synchronized to a MTC- or MMC-compatible multi-track
recorder. The RS7000 does not generate MTC on it's own, so
you'll need an optional MTC device such as the Yamaha
AW4416. Use MIDI cables to connect the MIDI OUT connector
of the RS7000 to the MIDI IN connector of the MTR, and the
MIDI IN connector of the RS7000 to the MIDI OUT connector
of the MTR. The RS7000 will sync to the MTC clock signal
received from the external device. If your MTR recognizes
MMC, then the start/stop, fast forward and rewind functions can
be remotely controlled from the RS7000. In this case go to the
UTILITY mode MIDI page and set the MIDI Sync parameter to
"MTC" (Page 260).
Preparation and Setup
Tone generator
module
MIDI
IN
SCSI
MIDI OUT
RS7000 23