Table of Contents
Advertisement
2.3 The machine
2.3.1 Description
Radial drills are purposely designed to process bulky objects. Tailift has 20 years of
history and experience in behind. It knows radial drills certainly very well.
Tailift radial drills will be your best choice. The material that the machine can process
on are : mild steel, metal, stainless steel, cast iron, aluminum, copper,,,, etc, except
magnesium alloy. (Note 1)
Note 1: Processing magnesium alloy may cause fire.
2.3.2 Parts
There are six categories of parts on the radial drill: Gearbox, Arm, Column, Top
Cover, Box Table and Base. The following are its description and locations.
1. Base
2. Gear box
3. Arm
4. Column
5. Top Cover
6. Box table
7. The ball screw transmit
ion motor and clamping
mechanism.
The main aim of the base is to support the whole weight of the
machine. In addition, the cutting fluid is contained here and the
Box Table is installed on.
It is the core part for the radial drill for all procession is finished
here, like speed switch, auto feed, spindle,,, etc. They are inside
of the gearbox.
It is to support the gearbox and is connected with the column.
It is to support the gearbox and the arm. It connects the base.
It is at the top end of the Column.
Working with clamps, it enables to reach the required accuracy.
The motor is to elevate the gearbox. The clamping
mechanism is to clamp both the Arm and the Column.
2-2
Advertisement
Table of Contents
