6.2.2(For TPR-1600H/ TPR-2000H)
a.
Fig.
The relevant names
No.
name
1. Release switch
2. Clamping switch
Adjust the arm clamping lever as follows:
a. Press the figure1 shown in the bottom. Referring to the up right picture, release the
button after pointing the arrow head to b. The clamping device is released now.
b. Release the fastening nuts, totally 5 pieces, in the figure c and mark 4.
c. Using a wrench, adjust the nuts counter clockwise about 180°. (totally 5 pieces bolts)
d. Fasten the nuts, marked 4 in the figure c. (totally 5 pieces bolts)
e. Press the figure2 shown in the bottom left picture 1. Referring to the up right picture,
release the button after pointing the arrowhead to A. The clamping device is tightened
now.
b.
Fig.
6-2
c.
Fig.
The relevant names
No.
name
Adjusting nut
3.
Fastening nut
4.