Tpr-2000H Specification - Sharp RD-1230 Operation Manual

2.4.4 TPR-2000H Specification.

Diameter of column
Distance from Column surface to Spindle center, max.
Distance from Column surface to Spindle center, min.
Travel of Spindle head
Distance from Base surface to Spindle end, max.
Distance from Base surface to Spindle end, min.
Elevating height of Arm.
Effective area of Table.
The dimensions of the Base (L ╳ W ╳ H)
Taper hole Spindle.
Stroke of the Spindle.
R.P.M. of Spindle.（R.P.M.╳ step）
Feed of Spindle（REV.╳ step）
Main motor.
Elevating motor.
Clamping motor.
Coolant pump .
Machine height from floor, max.
Height from the Column top to floor
Net weight (approx.) kgs
Shipping Gross weight. (approx.) kgs
Shipping dimensions(L╳W╳H)
The max. processing capacity.
Drilling
Taping
TPR-2000H
∅65
Steel
∅70
Cast iron
∅50
Steel
∅60
Cast Iron
2-6
432mm
2000mm
490mm
1510mm
1900mm
500mm
1100mm
1000mm╳800mm╳500mm
2908mm╳1102mm╳250mm
MT#5
370mm
35 – 1890 12 steps
0.07 - 0.96
5.625KW(7.5HP)
2.25KW(3HP)
0.75KW(1HP)
0.1KW(1/8HP)
3470mm
2960mm
6100kg
6600kg
3105mm╳1400mm╳3240mm
6 steps