Tpr-1230 Specification - Sharp RD-1230 Operation Manual

2.4.2 TPR-1230 Specification.

Diameter of column
Distance from Column surface to Spindle center, max.
Distance from Column surface to Spindle center, min.
Travel of Spindle head
Distance from Base surface to Spindle end, max.
Distance from Base surface to Spindle end, min.
Elevating height of Arm.
Effective area of Table.
The dimensions of the Base (L ╳ W ╳ H)
Taper hole Spindle.
Stroke of the Spindle.
R.P.M. of Spindle.（R.P.M.╳ step）
Feed of Spindle（REV.╳ step）
Main motor.
Elevating motor.
Clamping motor.
Coolant pump .
Machine height from floor, max.
Height from the Column top to floor
Net weight (approx.) kgs
Shipping Gross weight. (approx.) kgs
Shipping dimensions(L╳W╳H）
The max. processing capacity.
TPR-1230
Drilling Steel
Cast iron
Taping Steel
Cast Iron
635mm╳520mm╳415mm
1710mm╳715mm╳180mm
0.05,0.09,0.15
2035mm╳995mm╳2240mm
∅42
∅55
∅25
∅38
2-4
300mm
1170mm
340mm
890mm
1370mm
490mm
630mm
MT#4
250mm
44-1500 12 steps
3 speeds
2.25KW(3HP)
0.75KW(1HP)
0.75KW(1HP)
0.1KW(1/8HP)
2780mm
2060mm
2100kg
2300kg