Work Light; Cutting Fluids; Elevating The Arm - Sharp RD-1230 Operation Manual

5.6 Work light

Turn on the work light. Switch the work light to "ON"
Turn off the work light. Switch the work light to "OFF"

5.7 Cutting fluids

Turn on the cutting fluids. Switch the cutting fluids to "ON" position.
Turn off the cutting
fluids.

5.8 Elevating the arm .

Diagra
ms
For
Descrip
TPR-1230,TPR-1230H
tion
(Type I)
Steps Turn the cross switch to "ARM UP" if you want to elevate it up, Turn the cross switch
to "ARM DOWN" if you want to elevate it down. Turn the cross switch to the middle
after the Arm reaches the required position.
Precaution
When the Arm is elevating, the clamping device will release itself automatically. When the
cross switch is turned to the middle, the clamping device will tighten itself automatically.
position.
position.
Switch the cutting fluids to "OFF" position.
For TPR-1230,TPR-1230H
(Type II)
5-14
1
Cross Switch.
For TPR-1600H, TPR-2000H