Table of Contents
Advertisement
Chapter 2 Preparations
5. Engage the insulator with bracket to fix it
(2 places).
6. Insert the pin terminal of RAID Controller
into the riser slot, and secure the RAID
Controller with two screws removed in
Step 3.
7. Remove the three screws from bracket,
and remove the bracket from the chassis.
8. Connect SAS cable to Port0-3 connector
on RAID Controller.
Insulator
Bracket
Screw
Express5800/E120e-M User's Guide
1. Installing Internal Optional Devices
Screw
Bracket
73
Advertisement
Table of Contents
