Chapter 2 Preparations
1.13.1 Installation
Install a hard disk drive by using the following procedure.
1. Refer to steps 1 to 3 in Chapter 2 (1.3 Overview of Installation and Removal) for preparations.
2. Locate the bay where you are going to install the hard disk drive.
The server provides 4 bays. Install hard disk drives in ascending port number order.
3. Remove the dummy trays.
Dummy trays are installed in all bays except for bay 0.
4. Unlock the handle of the tray.
Note
In the RAID System, use hard disk drives that have the same specifications (capacity,
rotational speed, and standard).
Note
Keep the dummy trays for future use.
Express5800/E120e-M User's Guide
1. Installing Internal Optional Devices
87