Sony PCWA-C100 Owner's Manual page 21

Getting started
2 Double-click the System icon.
The System dialog box appears.
3 Click the Hardware tab, then click Device Manager.
4 Double-click Network adapters, then double-click Sony PCWA-C100 Wireless PC Card.
The Sony PCWA-C100 Wireless PC Card Properties dialog box appears.
5 Make sure that the This device is working properly message is displayed under Device status.
6 Click OK.
The Device Manager window appears.
7 Click
The System Properties dialog box appears.
8 Click OK.
The Control Panel window appears.
9 Click
The Control Panel window closes.
The Wireless LAN PC Card is not working properly in the following cases:
❑
Sony PCWA-C100 Wireless PC Card is shown with a yellow question or exclamation mark.
Click Sony PCWA-C100 Wireless PC Card and click Remove. Then repeat from step 2 in Installing the
driver software
❑
Double-clicking Network Adapters does not display Sony PCWA-C100 Wireless PC Card.
You have to remove the Wireless LAN PC Card. Please refer to the Removing the Wireless LAN PC Card
(page 14)
❑
Double-clicking Other devices displays Sony PCWA-C100 Wireless PC Card.
You have to click Sony PCWA-C100 Wireless PC Card, then click Remove. Repeat from step 2 in
Installing the driver software
.
.
(page 15).
section to remove it. Then repeat from step 2 in Installing the driver software
(page 15).
n N
20
(page 15).